Job Board Search

Results Found: 112
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Corporate Recruiter
Category: Administrative, Support & Clerical
Corporate Recruiter ResponsibilitiesSource candidates for engineering, bio engineering, sales and supply chain roles  Corporate Recruiter RequirementsAt least 5 years of corporate recruiting experience Experience utilizing different recruiting tools (LinkedIn, job boards, etc.) Full life cycle recruiting experience  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, ...read more
Contact:
Taylor Crandall
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Chassis Technician
Category: Automotive/Mechanics
Chassis Technician ResponsibilitiesPrimary responsibilities will include fabricating, setting-up and conducting tests on advanced chassis dynamometer system for certification and development projectsResponsible for calibrationPreventive maintenance of equipmentMaintaining quality assurance procedures  Chassis Technician RequirementsSystems knowledge: PC based applications including Microsoft Office / ADAPT / Lab View Mechanical or Electrical experience required Fabrication experience a plus Emissions ...read more
Contact:
Katie Linton
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Machine Operator Supervisor
Category: Automotive/Mechanics
Machine Operator Supervisor Responsibilities Perform machine shop functions such as setting up and operating machines to support the production floor while leading line of operatorsReport and detect defective materials and questionable conditions to department leader and plant managerPerform preventative maintenance on machines following the P.M. charts, and maintain work area and equipment while following safety regulations  Machine Operator Supervisor Requirements This is a 2nd shift, 4 month contract to ...read more
Contact:
Kara Millerschin
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Dyno Technician
Category: Automotive/Mechanics
Dyno Technician ResponsibilitiesSet up and remove various passenger vehicles on a chassis dynamometer Input test criteria and vehicle information into dyno controller Conduct Road Load derivations and validate results Drive test vehicles on chassis dyno by following drive traces without errors Operate and monitor emission analyzer equipment Drain and fill fuel tank to specifications Install and remove various emission related partsTrack fuel use and maintain inventory Process filters for particulate data ...read more
Contact:
Brenna Walker
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Cost Engineer
Category: Automotive/Mechanics
Cost Engineer ResponsibilitiesWorks as part of a cross-functional team to assist with managing and executing large programsDevelop Microsoft Excel Spreadsheets to support quantitative data analysis, provide business consulting, conduct research, prepare graphs and chart, and analyze and interpret cost and programmatic dataSupport other tasks; including cost benefit analyses, cost proposal evaluation, and economic studies and analyses, as requiredResearch and develop cost methodologies, develop cost ...read more
Contact:
Bradly Rogers
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
3rd CNC Machine Operator
Category: Automotive/Mechanics
3rd CNC Machine Operator ResponsibilitiesHit production numbers throughout the day Understand Wear Offsets, Given Dimensions / Tolerances, properly use Gages / how to calibrate  3rd CNC Machine Operator Requirements2 years’ experience operating machines Able to utilize proper tools to keep components within tolerances  Utilize Plex systems to keep track of inventory  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and ...read more
Contact:
AJ Sabo
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Automotive Technician
Category: Automotive/Mechanics
Automotive Technician Responsibilities Experience working with automobiles or within the automotive industryExperience with power tools and hand toolsPassion for the automotive industry  Automotive Technician Requirements Ability to work in a fast paced environmentAbility to work within a group / teamHigh school diploma / GED required  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Test Technician
Category: Automotive/Mechanics
Test Technician Responsibilities 1st shiftPerform all necessary tests on productsEnsure effective test releases are conducted in a timely mannerEnsure that the testing and report writing are met at a high standardDurability and Reliability testing experience Prototype up new variants and fit into a demonstration vehicle  Test Technician Requirements Associates degree or 6 months to 1 year of experienceMechanically inclined  Reliance One, Inc. provides equal employment opportunities to all employees and ...read more
Contact:
Amanda Magretta
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Maintenance Electrician
Category: Automotive/Mechanics
Maintenance Electrician ResponsibilitiesWellness & Fitness Incentive (Money for gym membership)Stake Holder in Company Great Health insurance (Low Co-Pay)15 Paid Holidays – 2 Weeks’ Vacation401k 5% Match Repair and Maintenance of building, presses and equipment throughout plantPerforms adjustment, repairs, or replacements on motors, controls, and other electric equipmentResponsible for machine maintenance, building maintenance Responsible for participation in press set-ups, teamwork and continuous ...read more
Contact:
AJ Sabo
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Maintenance Technician
Category: Automotive/Mechanics
Maintenance Technician ResponsibilitiesDesign and rebuild electrical sequence control circuitryDevelop and appropriate PC program for production machineryTroubleshoot, repair, and calibrate heat controllers, power supplies, and temperature recordersProblem-solve and repair electronic, numerically controlled servo and stepper motor controller / drive systemsProblem-solve and repair automated production machinery and electrical logic control circuitsSuggest and implement improvements to existing ...read more
Contact:
Brenna Walker
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Purchasing Assistant
Category: Automotive/Mechanics
Purchasing Assistant ResponsibilitiesRisk management: be able to analyze and identify any issues that may be a negative impact to the companyAnalytical Skills: be able to work with multiple vendorsDecision-Making Skills: be able to use the information that was gathered to make decisions on behalf of the companyMath Skills: basic math skills to be able to analyze prices and get the best cost possibleNegotiating Skills: be able to work with suppliers to create the best contractExcel (beyond basic)Review all ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Purchasing Assistant
Category: Automotive/Mechanics
Purchasing Assistant ResponsibilitiesRisk management: be able to analyze and identify any issues that may be a negative impact to the companyAnalytical Skills: be able to work with multiple vendorsDecision-Making Skills: be able to use the information that was gathered to make decisions on behalf of the companyMath Skills: basic math skills to be able to analyze prices and get the best cost possibleNegotiating Skills: be able to work with suppliers to create the best contractExcel (beyond basic)Review all ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Purchasing Coordinator
Category: Automotive/Mechanics
Purchasing Coordinator ResponsibilitiesPrepares and processes vendor purchase ordersManages request for quotes (RFQ) efforts, gathers product and service information and requests quotes from new or existing vendorsContacts vendors in order to schedule or expedite deliveries and to resolve shortages, missed or late deliveries and other potential issues related to an open purchase orderCreates and maintains vendor records  Purchasing Coordinator RequirementsBachelor’s degree in a related field or equivalent ...read more
Contact:
Cory House
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Die Cast Tool Designer-Modeler
Category: Automotive/Mechanics
Die Cast Tool Designer-Modeler Responsibilities Create, Modify and Correct 3D tooling models in native and on Team CenterSupport skilled trades, assisting in creating standardized work and developing repair manuals for toolingResponsible for design, development and change management of large aluminum die cast dies where a considerable amount of creativity, initiative and attention to detail is requiredThe candidate will be responsible to give technical assistance and direction to tooling suppliersEstablish ...read more
Contact:
Steve Ellsworth
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Senior Technical Specialist
Category: Automotive/Mechanics
Senior Technical Specialist ResponsibilitiesAbility to discuss, diagnosis, & repair robot operational and process problems as reported by the customer or service engineerAnswer technical support phone calls and properly log via the TSL, identify the problem and follow up with a thoroughly researched solutionCreate CCM quotations per customer request and part number searches as requiredMaintain and achieve OMQ group measures for phone call answer rate and TSL closure rateCreate TSL Quick Reference and Common ...read more
Contact:
AJ Sabo
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Senior Instructor
Category: Automotive/Mechanics
Senior Instructor ResponsibilitiesDevelop and present training programs for customers, distributors and the company’s personnelThe position requires the Senior Instructor to assume a leadership role in the daily interface with customers Interface with other groups within the company to ensure that training materials being presented are in accordance with the latest information available regarding product development requirementsThe position requires a strong interface presence with the cRc Application ...read more
Contact:
AJ Sabo
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Designer
Category: Automotive/Mechanics
Designer ResponsibilitiesDesign of plastic components using UG NX or CATIARelease of designs within customers’ data management Act as customer liaison for design of products as they relate to program launches Utilize creativity and technical knowledge in design to create a product that is aesthetically pleasing, and meets fit, form and function  Designer Requirements0-5 years+ work experience in CAD Injection molding design experience   Reliance One, Inc. provides equal employment opportunities to all ...read more
Contact:
Nicole Tompkins
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Tooling Engineer – Castings
Category: Automotive/Mechanics
Tooling Engineer – Castings ResponsibilitiesMust have casting experience – preferably aluminum casting exp.Typically, responsible for leading, coordinating, and monitoring the work of others who perform the same type of work as this jobLead responsibilities typically include training, checking the work of others and ensuring supplies and materials are available             The Casting Engineer is an experienced engineer and serves as the primary and responsible person for developing a casting solution for ...read more
Contact:
Steve Ellsworth
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Accountant
Category: Automotive/Mechanics
Accountant Responsibilities Booking invoices and paymentsSupport in local taxReportingSupport in AP / ARGeneral bankingAccounting using US GAAP  Accountant Requirements Degree in Accounting or Business ManagementManufacturing accounting experienceSAP knowledge strongly preferredStrong US GAAP knowledgeCPA License strongly preferred  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without ...read more
Contact:
Brenna Walker
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Machine Operator
Category: Automotive/Mechanics
Machine Operator Responsibilities Passion for the automotive industryAbility to work in a fast paced environmentAbility to work within a group / team  Machine Operator Requirements High school diploma / GED requiredExperience working within the automotive industryExperience operating various machines Experience with power tools and hand tools  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Lead Commodity Buyer (Rubber, Plastics, Raw Materials)
Category: Automotive/Mechanics
Lead Commodity Buyer (Rubber, Plastics, Raw Materials) ResponsibilitiesIn line with Company business strategic objectives, lead the negotiations to select, appoint and steer a supply base that progresses the Company’s objectives on quality, cost, delivery and innovationMonitor, manage and report on all influences to cost and performance, including economic, legislative, political and environmental factors, conducting regular benchmarking to ensure the maintenance of competitive advantageLead negotiations, ...read more
Contact:
Trent Vartanian
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Catia Designer
Category: Automotive/Mechanics
Catia Designer ResponsibilitiesProduce design concepts using 3D CAD (Catia V5) Works to timelines submitted by program managerProduces 2D drawings in accordance with company policyResponsible for design / development from concept, through tooling, testing, and into production Liaise with customers, internal and external, act as an ambassador for the company at all timesTravel when necessary for design reviews and customer meetings Produces designs in accordance with TS procedures Interface with SWS members ...read more
Contact:
Angela Foley
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Talent Acquisition Specialist
Category: Automotive/Mechanics
Talent Acquisition Specialist ResponsibilitiesDevelop recruiting strategies based on the needs of our business in various locations in the United StatesConduct meetings with hiring managers to understand position requirements prior to the start of recruitmentCreate and post internal and external job postings which attract the best talent for the companySource active and passive candidates using recruitment tools such as networking, social media, applicant tracking systems, university relations, and ...read more
Contact:
Troy Renkiewicz
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Commissioning Technician
Category: Automotive/Mechanics
Commissioning Technician Responsibilities This person will get the machines ready for the engineers to automateWiring, set dip switches, load software, bring up safety’s, set up the machine to run in manualDebug light tools  Commissioning Technician Requirements 3-5 years of experience in PLC TroubleshootingAbility to read and interpret blueprints, industrial, and electrical schematics  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits ...read more
Contact:
Kara Millerschin
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Quality Iteration Technician
Category: Automotive/Mechanics
Quality Iteration Technician Responsibilities Responsible for knowledge of surface quality, assembly quality, tooling and panel repeatability and tooling adjustments to improve panel quality Communicate with tooling and die personnel to achieve required quality requirementsAssess project quality and take appropriate measures of correctionReview project proposal or plan to determine time frame, funding limitations, procedures for accomplishing project, staffing requirements, and allotment of available ...read more
Contact:
Jordyn Schmid
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
CNC Set-Up Programmer
Category: Automotive/Mechanics
CNC Set-Up Programmer ResponsibilitiesWork with Fuji and Okuma CNC lathes Troubleshoot, perform tool changes, maintain current jobs on multiple lines to ensure accuracy Read and understand programs to perform editsSelects, aligns, and secures holding fixtures, cutting tools and attachments Calculates and sets controls to regulate machining factors Starts and observes machine operation to detect malfunctions or out-of-tolerance machiningAdjusts machine controls or control media as required  CNC Set-Up ...read more
Contact:
AJ Sabo
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Test Technician
Category: Automotive/Mechanics
Test Technician ResponsibilitiesRun tests, develop, and maintain scripts to build and automate hardwareDocument test results and provide reportsCoordinate with development engineers in debugging and troubleshooting problemsOrder new test equipment, supplies, or replacement partsMonitor computer-controlled test equipment, according to written or verbal instructionsDevelop instrumentation and laboratory test equipment for special purposesRead and interpret blueprints, schematics, work specifications, ...read more
Contact:
Brenna Walker
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Quality Iteration Technician
Category: Automotive/Mechanics
Quality Iteration Technician Responsibilities This is an entry level position that we will train on, opportunity to go direct if they work outMust be able to travel 60-80% of the time (Local travel and all paid for) No travel for the first 6 monthsGood with computers and measuring, mics / calipersThis position will be responsible for knowledge of surface quality, assembly quality, tooling and panel repeatability and tooling adjustments to improve panel qualityCommunicating with tooling and die personnel to ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Machine Operator
Category: Automotive/Mechanics
Machine Operator ResponsibilitiesDetects and reports defective materials or questionable conditions to the department leader or plant managerPerforms prescribed preventative maintenance on machines as required per the P.M. charts  Machine Operator Requirements1st or 2nd shift availableMust be mechanically inclinedHigh school diploma or GED  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type ...read more
Contact:
Kara Millerschin
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Design Engineer
Category: Automotive/Mechanics
Design Engineer ResponsibilitiesResponsible for creating concept drawings for customer approval and finished build drawings for production using SolidWorks 3D CAD softwareProduction drawings to include all detail required for fabrication of custom fabricated material handling equipmentInterface with sales / customer for design input and manufacturing for fabrication of your design  Design Engineer Requirements Bachelor’s Degree in Engineering (mechanical, computer, electrical) or related workGibbs ...read more
Contact:
Ericka Bush
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
On Site - Technician 3rd Shift
Category: Automotive/Mechanics
On Site - Technician 3rd Shift ResponsibilitiesResponsible for coordinating the activities of an “Company” Tools and Assembly Systems on-site (at the customer’s location) tool maintenance contractThis 3rd shift position will be based at the customer’s facility but will require 5% travel nationallyThe On-Site Coordinator will be responsible for setup and configuration of tooling, maintaining the PM and calibration schedule of the tooling population, the logistics of shipping tools in and out of the ...read more
Contact:
Steve Ellsworth
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Gear Design Engineer
Category: Automotive/Mechanics
Gear Design Engineer ResponsibilitiesHas responsibility for Helical Gear designs within the product system from concept through full manufacturing launch in accordance with PE-PDP and program launch gate deliverablesUtilizes computer aided engineering (CAE) methodologies and results to drive the design of sub-systems and componentsPerforms component FEA, 1D model analyses, spreadsheet calculations as neededWorks with cross-functional and cross-region resources in the execution of development of new gear ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Automotive Shift Supervisor
Category: Automotive/Mechanics
Automotive Shift Supervisor ResponsibilitiesMonitoring direct reports such as Team Members, Operators, Technicians, Clerks Monitoring, evaluation and optimization of shift specific quality and logistics performanceCoordination and monitoring of the JIS-deliveryParticipation in quality meetings (KDH meetings – customer)Participation in meetings regarding complaints and class defective goods (internal/external)Staff responsibilities for employees during the shiftContact person for customerMonitoring of goods ...read more
Contact:
Brenna Walker
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Entry Level Mechanical Engineer
Category: Automotive/Mechanics
Entry Level Mechanical Engineer Responsibilities Entry Level Mechanical EngineerResponsible for the Product Engineering of GearsStrong training programTier 1 Automotive SupplierPerform product development of gears and shafts  Entry Level Mechanical Engineer RequirementsAutomotive internship preferred  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Quality Engineer (Aerospace)
Category: Aviation & Airlines
Quality Engineer (Aerospace) ResponsibilitiesStrong background in Quality Inspection as well as Engineering backgroundCapable of reading and interpreting customer blueprintsBe responsible for assuring Quality documentation is properly maintainedFacilitate the investigation and elimination of causes of quality problems and follow-up on corrective actionsDevelop, implement, and audit inspection plans following approved Quality Management systems Develop and analyze statistical data and product / process ...read more
Contact:
AJ Sabo
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Quality Supervisor (Aerospace) – Great Benefits
Category: Aviation & Airlines
Quality Supervisor (Aerospace) – Great Benefits ResponsibilitiesMonitors the Quality Control Inspection teamGear Inspectors use outlined methods, operations, setups, and prescribed specifications Inspect visually, in process and completed mechanical units and subassembliesThey will accept or reject components based on customer specificationsGear / Final Inspectors work from blueprints, diagrams, customer specifications, drawings or inspection instructions and checklistsManages performance including ...read more
Contact:
AJ Sabo
Phone:(248) 922-4500
4110 Market Place
Flint, MI 48507
Facilities Maintenance Mechanic I
Category: Construction, Installation and Mechanical
Ability to trouble shoot and repair include mechanics, pneumatics, hydraulics, machining, welding and electrical maintenance. Experience: 1 year of technical training and 1 year of related work experience. Duties: Keeping facilities, machinery and mechanical equipment PM's up to date. Trouble shooting, repairing, and new equipment installation, under the direction/guidance of more experienced maintenance mechanics are other duties to be performed. Responsible for assisting in PM's the repair and ...read more
Contact:
Phone:(248) 299-8310
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Soft Trim Engineer - 00045
Category: Engineering/Design
Specific Responsibilities:— Lead and manage the daily activities of assigned projects— Lead design and development of new products within schedule and budget parameters— Organize and lead cross-functional seat trim reviews— Plan and develop experimental test programs and evaluate the results— Issue drawings, specifications, BOMs (header cards)— Change and release coordination— Proactively identify and resolve engineering and manufacturing related issues— Resolve technical and manufacturing issues without ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Soft Trim Engineer Supervisor - 00046
Category: Engineering/Design
Summary: — Directs and coordinates activities of the engineering department to design, manufacture, and test components, products, and systems by performing the following duties personally or through subordinatesEssential Duties and Responsibilities:— Directs department activities to design new products, modify existing designs, improve production techniques, and develop test procedures— Resolves problems using solutions that involve new techniques, technologies, or concepts— Analyzes technology trends, ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Catia Designer - 00047
Category: Engineering/Design
GENERAL PURPOSE OF THE POSITION: Prepares designs of components, mechanisms or complete products. The Designer may prepare designs of complete Interior systems, soft and hard trim components. Work is preformed independently with supervision to assist with difficult tasks. KEY ELEMENTS OF THE POSITION:— Originate and develop practical designs that consider fit, function, weight, and cost— Produce designs compatible with manufacturing, assembly and service requirements— Prepare and review designs and ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Product Engineer - Interiors - 00038
Category: Engineering/Design
Position Overview: Identify, interpolate and execute engineering solutions within the business unit. Must be familiar with all grades of materials as they relate to performance and appearance of such products. Communicate within the group for solutions to issues as they arise during design, implementation and manufacturing processes. A strong member of the Product Development Team directing and taking actions as necessary to ensure customer deliverables.Responsibilities:— Leads the design efforts ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Senior Designer 00022
Category: Engineering/Design
Position Summary: Catia Designer  — Designs 3D math Data, working layouts and typical sections of automotive vehicle exterior body components, assemblies and systems form engineering sketches and to specifications Qualifications: — Associates Degree preferred. — Minimum 5 years of related experience  Essential Duties May Include:  — Analyzes data to develop new designs for automotive components and systems— Designs components and systems to provide maximum customer value and vehicle function, ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Senior Product Engineer - Closures 00023
Category: Engineering/Design
Experience:  — BIW/Closures or spaceframe development— Steel and aluminum stampings, hardware, mechanisms— 5 + years experience— Bachelor's degree  — Drug and Background Check Required.  To apply, visit our website at http://www.pgkservices.net/:— Select "Career Opportunities" — Select “Job - Click Here"— Refer to Job Code 18-00023  PGK is an equal opportunity at will employer.This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Senior Product Engineer - Exteriors 00024
Category: Engineering/Design
— Exterior experience with body side moldings, spoilers, covers, etc. — Part release and testing experience required — Familiarity with major CAD applications a benefit — Bachelors Degree in Engineering  — 5+ years related experience in BIW development required — Strong knowledge of materials, basics of formability, joining, and federal requirements is essential  — Drug and Background Check Required.  To apply, visit our website at http://www.pgkservices.net/:— Select "Career Opportunities" — Select ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Sr. Designer - Interior Trim - 00039
Category: Engineering/Design
OVERVIEW:Prepares major designs of complex units, mechanisms, complete components or subsystems of vehicles. This position may also prepare major designs of complete material run-off required in the manufacturing process. Work is creative with a wide-latitude for independent judgment and general supervision. The position is responsible to ensure that vehicle requirements are incorporated into the design. This position is responsible to blend the studio theme with the functional engineering requirements so ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Layout Designer - 00048
Category: Engineering/Design
Prepare CAD drawings and layouts to set specifications from existing 3D math data. Details reference points, dimensions and dimensional requirements on 2D drawings for fabricating, welding, and assembling in structural metal products. ESSENTIAL DUTIES: — Utilizes knowledge of CAD system, GD&T, engineering practices, materials, and other physical sciences to complete drawings — Shows GD&T, dimensions and materials to be used, and other information necessary to make detailed drawings clear and complete— ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Sr. Structural Engineer - 00050
Category: Engineering/Design
Sr. Structural Engineer  ESSENTIAL DUTIES INCLUDE: — Analyzes FEA results and proposed product changes to determine feasibility or improvement of component and systems— Confers with Product Engineers to clarify or resolve problems and develop designs — Correlates experimental data to simulation data— Analyzes FEA results to determine if design meets functional and performance specifications— Confers with engineering personnel to prepare design modifications as required to satisfy performance requirements— ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Product Specialist (Trim) - 00052
Category: Engineering/Design
Product Specialist (Trim)  Department: Engineering Reports to: Engineering Manager or Engineering SupervisorSpecific Responsibilities: — Assist in the daily activities of assigned engineering projects — Assist Soft Trim Engineer in the design and development of new products within schedule and budget parameters — Participate in cross-functional seat trim reviews — Plan and develop experimental test programs and evaluate the results — Issue drawings, specifications, BOMs (header cards) — Change and ...read more
Contact:
Phone:(248) 290-0500
4110 Market Place
Flint, MI 48507
Builder with Maintenance Tech/CNC
Category: Engineering/Design
Responsible for buildingand/or assembling machineryAbility to read blueprintsPerform complete layouts, and build systemsWorks well individually, and as a team.CNC repair experience.Located in Auburn Hills
Contact:
Phone:(248) 299-8310
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Senior System Integration Engineer
Category: Engineering/Design
Senior System Integration Engineer ResponsibilitiesCandidate should have expertise in engine systems and powertrain systems integration in virtual environment (GT-Power) for variety of applications including steady state and transient operating exhaust systems, combustion systems including air handling and fueling, torque converters, transmission, driveline, vehicle dynamics, P/T systems controls for engines and transmissions, engine systems and vehicle nominal and off-nominal calibrations activities ...read more
Contact:
Angela Foley
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Senior Virtual Controls Engineer
Category: Engineering/Design
Senior Virtual Controls Engineer ResponsibilitiesControls Engineer is responsible for the development of powertrain control modules using 1D GT-Power suite and Matlab / Simulink models as well as Hardware-in-the-loop (HIL) simulation environmentThis position requires a candidate with strong modeling, combustion and engine control backgroundThe candidate record must reflect ability to set new methodologies and techniques to develop robust and accurate engine and power-train control modules to solve ...read more
Contact:
Angela Foley
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Controls Engineer
Category: Engineering/Design
Controls Engineer ResponsibilitiesResponsible for all the assembly equipment: electrical, pneumatic and hydraulic controls of all production assembly equipmentEnsure that all equipment controls are up to date and operationalMinimize and control assembly downtime related to equipment issuesDesign and implement equipment changes related to electrical and pneumatic controls, as well as provide training relative to those changesPromote and investigate new concepts and advances in manufacturing techniques and ...read more
Contact:
Jordyn Schmid
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Tooling Engineer
Category: Engineering/Design
Tooling Engineer Responsibilities Evaluation of and technical discussions on tool concepts Hand-over of specification-compliant tools to the production departments Preparation and carrying out of tool allocation negotiations, generation of sampling information Assistance for sample submission with the toolmakers Generation of tool inquiries, specifications, manufacturing plans and due date plans Issuing cost notifications and work orders Initiation and monitoring of tool changes Carrying out tool acceptance ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Entry Level Industrial Engineer
Category: Engineering/Design
Entry Level Industrial Engineer Responsibilities Open to college students who are soon to graduateLooking for recent college graduates  Entry Level Industrial Engineer RequirementsBachelor’s degree in Industrial Engineer – Industrial Engineering Major is a MustAutomotive internships preferred  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Lead Validation Engineer
Category: Engineering/Design
Lead Validation Engineer ResponsibilitiesLead validation efforts for Car Multimedia productsPlan and deliver to a software release scheduleCreate, manage and execute test plansPerform functionality and regression testingCoordinate and track validation activitiesThis includes analyzing and tracking feature complexity and required hardware & software combinations for all relevant componentsOversees, assigns and reviews work of lower level colleaguesCoaches and provides guidance, feedback and on-the-job ...read more
Contact:
Colin Ross
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Controls Engineer
Category: Engineering/Design
Controls Engineer ResponsibilitiesDesign electrical circuits, pneumatic circuits, plc programs and HMI configurations to control assembly automation for the automotive powertrain industryEffectively communicate with vendors, co-workers and customers while completing design tasksDesign automotive powertrain assembly controls systems to conform to as-sold specifications as described in written sales proposals and kick-off meetingsDevelop, program and document:480VAC and 120VAC power distribution circuits24VDC ...read more
Contact:
Cory House
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Entry Level Electrical Engineer
Category: Engineering/Design
Entry Level Electrical Engineer ResponsibilitiesEnsure that all equipment controls are up to date and operationalMinimize and control assembly downtime related to equipment issuesDesign and implement equipment changes related to electrical and pneumatic controls, as well as provide training relative to those changesPromote and investigate new concepts and advances in manufacturing techniques and equipment advantageous to manufacturingDevelop, design and implement equipment to produce quality productsSupport ...read more
Contact:
Matthew Burnor
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Forging Engineer
Category: Engineering/Design
Forging Engineer Responsibilities To provide technical support and guidance to the forging processTo update and create manufacturing and quality engineering documents and proceduresTo coordinate and conduct manufacturing tests on machines and / or processes to meet safety, quality, throughput, and cost objectivesTo serve as coordinator for assigned projects  Forging Engineer Requirements Responsible for manufacturing and process engineering activities associated with precision metal formingSupport ...read more
Contact:
Shayne Thomas
Phone:(248) 922-4500
43 E 8th St Suite 250
Holland, Michigan 49423
Hardware Engineer
Category: Engineering/Design
Hardware EngineerA hardware engineer at twisthink is responsible for designing circuits for embedded solutions. He/she will run extensive analysis on the design including worst-case analysis, simulations, failure mode analysis, etc. In addition, he/she will create and execute test plans for the hardware when it physically arrives, work with oscilloscopes, power supplies, DC loads, signal generators, as well as supporting the software team during development. If you are a creative, results-oriented engineer ...read more
Contact:
Marissa Gagnon
Phone:(616) 393-7766
38700 Van Dyke Ave., Ste 150
Sterling Heights, MI 48312
Metallurgist
Category: Factory
Position Title:          Process Metallurgist Essential Duties and Responsibilities: ·       Complete Root Cause Analysis for failures and non-conformance  with Metallurgical Investigations ·       Design and Develop Processes for new Products of various materials like Copper alloys, Titanium alloys, nickel based alloys and steels ·       Improvement of existing processes   ·       Process Improvement in Forging and Heat Treatment   Requirements: ·       4 year degree in Metallurgical ...read more
Contact:
Phone:(586) 806-6614
38700 Van Dyke Ave., Ste 150
Sterling Heights, MI 48312
Forging Engineer
Category: Factory
Position Title:  Forging Engineer  ·       Develop and motivate engineering staff focused on customer satisfaction. ·       Organize department and workload to complete engineering activity within schedule and budget. ·       Manage and promote new process development. ·       Interact with customers and provide “hands-on” service to customers as needed. ·       Establish procedures in conjunction with other departments that focuses on continuous improvement and on time delivery. ·       Establish ...read more
Contact:
Phone:(586) 806-6614
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Area Manager
Category: Food Industry and Restaurants
Area Manager ResponsibilitiesLead, direct and promote company owned restaurants towards increased profit and growth to differentiate our brand from the competitorsEnsure the defining standards for the highest quality is being met in the restaurants dailyExecute and ensure that the standards are being reinforced throughout daily operationsUtilize knowledge of contracts, accounting, profit and loss, marketing, pricing and operations to coach the management teams and drive performanceEvaluate margins and ...read more
Contact:
Malinaly Davila
Phone:(248) 922-4500
Executive Office Building 2100 Pontiac Lake Rd, Bldg.41W
Waterford, MI 48328
Workforce Development Technician III
Category: Government
Under direction, performs a variety of duties related to the administration of workforce development programs (WDPs) funded under various statutes and grants, including the Workforce Innovation and Opportunity Act (WIOA), the Trade Adjustment Assistance Act (TAA), Welfare to Work programs, the Community Ventures program, and the Wagner-Peyser Employment Service (ES). Responsible for a number of programmatic areas, including on-the job training, classroom training, work experience, employment development ...read more
Contact:
Phone:(248) 858-0530
38700 Van Dyke Ave., Ste 150
Sterling Heights, MI 48312
Technical Recruiter
Category: Human Resources
K&A Resource Group is looking for an experienced Skilled Trades/Engineering/IT Recruiter to join our rapidly growing team.  Our entrepreneurial environment and competitive commission structure makes this an extremely rewarding opportunity for a motivated candidate. Responsibilities: ·         Full life-cycle of recruiting of technical professionals for contract and direct hire roles ·         Cold calling, pre-screening candidates, preparing candidates for interviews, reviewing resumes and assessing ...read more
Contact:
Rich Pennock
Phone:(586) 806-6614
850 Stephenson Hwy
Troy, Michigan 48083
Controls Engineer - Full Time
Category: Information Technology
Controls EngineerLocation: Shelby Township, MIDuration: FulltimeDescription:Basic Function: On-site support for debug, start up and final buyoff to customer specifications relative to client equipment.Duties and Responsibilities:- Proficient PLC Software- Commission equipment on manufacturing floor and follow equipment to the customer's facility which includes start up, debug, and assist in customer buyoff of equipment support system launch at customer facility.- Assist with Customer Service Calls- Document ...read more
Contact:
Phone:(888) 451-2519
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
MES Analyst - 00035
Category: Information Technology
The MES Analyst is responsible for ensuring that Manufacturing Execution System (MES) projects meet the business requirements of the business owners and documenting the requirements appropriately; communicating with the project team.Essential Duties and Responsibilities: — Manage manufacturing solutions projects— Manage resources, cost and time of a project— Assist in conducting research on software and hardware products to meet agreed upon requirements and to support purchasing efforts— Collaborate with ...read more
Contact:
Phone:(248) 290-0500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Sales System Analyst - 00033
Category: Information Technology
Position Overview:The Sales Forecast Database is a key system for all Divisions and Groups to support them in monitoring and tracking sales and business development opportunities. Support the vision and direction of the combined efforts of our sales & marketing, business development and finance departments by providing application support in the development, implementation and operation of the Database. Assess issues related to the ongoing development of the application and ensure the system is consistently ...read more
Contact:
Phone:(248) 290-0500
PO Box 2934
Ann Arbor, MI 48106
Product Expert - ADAS Tools and Testing (2613-AA)
Category: Information Technology
Product Expert - ADAS Tools and Testing (2613-AA) We are searching for a skilled engineer to join our client's team and grow into a role as an expert for an ADAS testing product. The ideal candidate will have been a systems engineer, an algorithm engineer or a senior software engineer, possibly with a focus on V&V. Additionally, the ideal candidate will come from a company working on Advanced Driver Assistance Systems (ADAS), which might be an OEM, an automotive supplier or even a microcontroller ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
ASP.NET Lead (2615-AA)
Category: Information Technology
ASP.NET Lead (2615-AA) Stout Systems is searching for a .NET Systems Analyst to develop and support several highly complex applications that are used by an impressive array of companies around the world. No two days will be the same as you perform development tasks on several systems, manage large sets of data and work as an analyst to translate business requirements and needs into technical specifications. LOCATION Ann Arbor, MI COMPENSATION Up to $110K EDUCATION Bachelor's of Computer Science ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
User-Centered Design Leader (2642-AA)
Category: Information Technology
User-Centered Design Leader (2642-AA) We are searching for an expert in user centered design to guide our client toward a culture of user-centered design. The ideal candidate will have strong UX skills and will have previous experience guiding a company from some other-centered design mindset to a user-centered design mindset. LOCATION Plymouth, MI COMPENSATION Up to $125K commensurate with skills and experience. Our client offers excellent benefits, making the overall compensation package very ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Pre-Sales Engineer (Contract-to-Hire) (2654-AA)
Category: Information Technology
Pre-Sales Engineer (Contract-to-Hire) (2654-AA) We are searching for a candidate to join our client's team in a hybrid role that can best be described as a pre-sales engineer. If you are intrigued, read on. Our client's product is an interactive, real-time engineering simulation tool for robotic vehicles. It allows manufacturers of robotic vehicles and systems developers to test and characterize vehicle performance, test full/semi-autonomous algorithms, and perform human-in-the-loop testing in a ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Senior Web Development Engineer (Tucson, AZ) (2669-AA)
Category: Information Technology
Senior Web Development Engineer (Tucson, AZ) (2669-AA) We are searching for a senior Web Development Engineer who is interested in joining a development team creating award-winning online supplemental educational products. Our client utilizes a fast-paced, iterative development process, publishing monthly for millions of students across the globe. Their developers come from a wide background of software technologies and tend to be a cut above most developers.  Regardless of your background, you will ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Build and Integration Engineer (2667-AA)
Category: Information Technology
Build and Integration Engineer (2667-AA) We are currently looking for a Build and Integration Engineer to join a global team at the forefront of the latest developments in automotive software, including user interfaces, voice recognition, driver assistance, navigation software, and autonomous driving features. We are looking for team members with strong communication and software development skills who thrive in a fast paced agile project environment. Applicants must be authorized to work in the US ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
QA Automation Engineer (1-2 years' experience) (2666-AA)
Category: Information Technology
QA Automation Engineer (1-2 years' experience) (2666-AA) We are searching for a QA Automation Engineer to join a team creating next generation testing tools and scripts. Our client is in the process of automating the testing for Universal Windows Platform (UWP) applications using Python and Squish. The applications are very complex, including 3D images. LOCATION Plymouth, MI COMPENSATION Up to $80K, commensurate with experience Our client offers excellent benefits, making the overall ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Senior Web Development Engineer (Ann Arbor, MI) (2674-AA)
Category: Information Technology
Senior Web Development Engineer (Ann Arbor, MI) (2674-AA) We are searching for a senior Web Development Engineer who is interested in joining a development team creating award-winning online supplemental educational products. Our client utilizes a fast-paced, iterative development process, publishing monthly for millions of students across the globe. Their developers come from a wide background of software technologies and tend to be a cut above most developers.  Regardless of your background, you ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Front-End / JavaScript Developer (2671-AA)
Category: Information Technology
Front-End / JavaScript Developer (2671-AA) We are searching for an experienced Front-End / JavaScript Developer to join a post sales engineering team. Working on a dynamic customer-facing team, you will be responsible for finding creative solutions for the customer's accessibility problems. You will also be responsible for product success at customer premises by ensuring successful implementation and inclusion of our client's products in the customer development life cycle. To be most valuable you ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
SAS Programmer (Health Care) (2676-AA)
Category: Information Technology
SAS Programmer (Health Care) (2676-AA) Are you an experienced SAS Programmer who is interested in improving clinical practices, patient outcomes, and health-related public policy? As a part of our client's team, your primary responsibility will be working with data from large clinical or claims data warehouses to produce Standard Analytical Files for research and study reports. LOCATION Ann Arbor, MI COMPENSATION Up to $90K plus a generous 10% 401K contribution and other similarly generous ...read more
Contact:
Phone:(734) 663-0877
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Web Architect
Category: Information Technology
Web Architect ResponsibilitiesTranslate and implement business strategies and ideas into creative technology solutionsResponsible for specific architecture and technology decisions such as developing and validating Proof of Concept solutions, and mentoring the development teams on further implementation to projectsDetermine system scope; defines non-functional requirements (interoperability, extensibility, etc.); develops scenarios that address anticipated future challenges (new technologies, outsourcing, ...read more
Contact:
Mitchell Turner
Phone:(248) 922-4500
23875 Northwestern Highway
Southfield, MI 48075
Oracle Sales Manager
Category: Information Technology
Sell software/information technology/suite of Oracle products/solutions/services directly or through channel partners in the US/North America region.Manage sales operations and account management activities and ensure on-time delivery of services. In addition, ensure deliveries meet or exceed customer requirements.Regularly compile detailed business status reports including the status of the sales, revenue generation, etc. Proactively identify any items of concern including possible impact to the schedule ...read more
Contact:
Shawnise Brown
Phone:(925) 924-0400
PO Box 2934
Ann Arbor, MI 48106
Testing and Validation Team Manager (2678-AA)
Category: Information Technology
Testing and Validation Team Manager (2678-AA) We are searching for an Engineering Manager to lead a Testing and Validation team that is 30+ engineers strong. The team is composed of developers working as Software Development Engineers in Test (SDET). In this role you will be responsible for coaching and developing your engineers in order to assist them on their career path. LOCATION Farmington Hills, MI Occasional travel required COMPENSATION Up to $125K, commensurate with experience Our client ...read more
Contact:
Phone:(734) 663-0877
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Business Analyst
Category: Information Technology
Business Analyst ResponsibilitiesWe are looking for a candidate with experience writing business requirements and running test effortsAs part of a growing company and team, the role requires strong leadership and forward thinking in order to deliver valuable solutions to automotive retailThe Business Analyst will work with product leaders, client relationship managers, development teams, QA, operations, and integrated business partners through the entire software lifecycleUnderstand business processes and ...read more
Contact:
Brendan Tobiczyk
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Site Reliability Engineer (SRE) Manager
Category: Information Technology
Site Reliability Engineer (SRE) Manager ResponsibilitiesOnly current green card holders and us citizens applyProvides strategic guidance to the team with responsibility for moving legacy hosted apps. onto modern platformsParticipates in the planning of future-state objectives and ties these to technologiesCreates plans and pipelines for the gradual cutover or migration to these technologiesOnce implemented maintain services once they are liveManages coordination between other teams and Site Reliability ...read more
Contact:
Jeff Decator
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Level 3 Support Technician
Category: Information Technology
Level 3 Support Technician Responsibilities This L3 resource will be dedicated only to Project-based workProjects will vary in size, scope and durationThis L3 will be likely working with multiple groups at the same time within the business unit here in SalineThere will be a need for this role in an ongoing capacityThey may be working on a refresh project with site services and at the same time working on an upgrade project and at the same time working with the security group on a task  Level 3 Support ...read more
Contact:
Mitchell Turner
Phone:(248) 922-4500
PO Box 2934
Ann Arbor, MI 48106
ASP.NET Lead (Contract-to-Hire) (2682-AA)
Category: Information Technology
ASP.NET Lead (Contract-to-Hire) (2682-AA) Stout Systems is searching for a .NET Systems Analyst to develop and support several highly complex applications that are used by an impressive array of companies around the world. No two days will be the same as you perform development tasks on several systems, manage large sets of data and work as an analyst to translate business requirements and needs into technical specifications. LOCATION Ann Arbor, MI COMPENSATION Commensurate with experience, plus ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Practice Lead - Simulation (2683-AA)
Category: Information Technology
Practice Lead - Simulation (2683-AA) We are searching for a unique individual with both technical and business development skill. Your background in Python or MATLAB coupled with your desire to understand and help solve customers' problems are key. LOCATION Ann Arbor, MI area COMPENSATION Commensurate with experience. Please note: In some cases, our client elects to engage candidates in a contract-to-hire model. If this applies to you, you would be an employee of Stout Systems for approximately 6 ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Simulation Software Engineer (2684-AA)
Category: Information Technology
Simulation Software Engineer (2684-AA) We are searching for a software engineer with simulation or engineering tools experience to work on game-like, real-time modeling and simulation projects. You will work on a small but growing team of software developers and technologists who work on state of the art simulation tools for the U.S. Department of Defense. LOCATION Ann Arbor, MI area COMPENSATION Commensurate with experience. Please note: In some cases, our client elects to engage candidates ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
AUTOSAR Software Engineer (2685-AA)
Category: Information Technology
AUTOSAR Software Engineer (2685-AA) Our client is looking for a Software Engineer who has experience with AUTOSAR, Global B or FNOS to work on a global team to design and develop embedded software for electronic control units and support customers.  Our client is a leader in their industry, providing embedded and connected software products and services for the automotive industry. For this position, a combination of creativity, problem solving, software development, and customer interaction skills ...read more
Contact:
Phone:(734) 663-0877
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Network Engineer
Category: Information Technology
Network Engineer ResponsibilitiesThe Network Engineer is responsible for maintaining the design and integrity of the internal systems, including customer-facing hosted and cloud environments, as well as providing technical assistance to team members with system and network requestsIT Support relating to issues with the internal systems and network infrastructureSupport services for Microsoft related technologies: Windows Server, Exchange, SQL, SharePoint, etc.Support services for virtualization ...read more
Contact:
Mitchell Turner
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Help Desk Technician
Category: Information Technology
Help Desk Technician ResponsibilitiesDiagnose and troubleshoot hardware, network, and software problemsMaintain records of technical support requests and needs for various sitesInstall and upgrade hardware, operating systems, and software programsCommunicate with end users during the support processMaintain user logins and passwords for various servicesMaintain software and hardware inventoriesProvide customer support through our help deskProcess warranty repair claims  Help Desk Technician RequirementsA ...read more
Contact:
Mitchell Turner
Phone:(248) 922-4500
PO Box 2934
Ann Arbor, MI 48106
Electrical Engineer / Systems Engineer (2681-AA)
Category: Information Technology
Electrical Engineer / Systems Engineer (2681-AA) We are searching for an Electrical Engineer to assist with the system-level design for medical devices. In this position you will use your multidisciplinary engineering knowledge to design and develop medical devices or components/subsystems in support of our client's strategic plans. LOCATION Ann Arbor, MI COMPENSATION Up to 125K plus potential 10% bonus EDUCATION Bachelor's degree in electrical engineering or substantial professional experience ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
C++ Software Engineer (2686-AA)
Category: Information Technology
C++ Software Engineer (2686-AA) We are searching for a solid C++ software engineer to work on 3D based engineering modeling and simulation tools. You will join a growing team of software developers and technologists who work on state of the art simulation tools for the U.S. Department of Defense. LOCATION Ann Arbor, MI area COMPENSATION Commensurate with experience. Please note: In some cases, our client elects to engage candidates in a contract-to-hire model. If this applies to you, you would be ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Java Developer with JavaScript (Remote) (2688-AA)
Category: Information Technology
Java Developer with JavaScript (Remote) (2688-AA) We are searching for an experienced Java Developer to join a post sales engineering team. You will also be responsible for product success at customer premises by ensuring successful implementation and inclusion of our client's products in their product development stacks. To be most valuable you will need to be comfortable with both front-end and back-end development. LOCATION Ann Arbor, MI Occasional infrequent travel ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Product Expert - ADAS Tools and Testing (2689-AA)
Category: Information Technology
Product Expert - ADAS Tools and Testing (2689-AA) We are searching for a skilled engineer to join our client's team and grow into a role as an expert for an ADAS testing product. The ideal candidate will have been a systems engineer, an algorithm engineer or a senior software engineer, possibly with a focus on V&V. Additionally, the ideal candidate will come from a company working on Advanced Driver Assistance Systems (ADAS), which might be an OEM, an automotive supplier or even a microcontroller ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Embedded Linux Engineer (2690-AA)
Category: Information Technology
Embedded Linux Engineer (2690-AA) We are currently looking for an Embedded Linux Engineer who will work as part of a global team to design and develop embedded software for electronic control units. For this position, a combination of creativity, problem solving, software development, and customer interaction skills are required. Occasional travel will be required. LOCATION Farmington Hills, MI COMPENSATION Commensurate with experience. Our client offers a very generous benefits package and an ...read more
Contact:
Phone:(734) 663-0877
PO Box 2934
Ann Arbor, MI 48106
Senior System Administrator/Engineer (Windows) (2691-AA)
Category: Information Technology
Senior System Administrator/Engineer (Windows) (2691-AA) We are searching for a senior Systems Administrator/Engineer to join a team in a hosted data center on the Windows platform. This role will be a key contributor to the administration and optimization of our client's hosting services. LOCATION Seneca Falls, NY This role is not available as a remote/telecommute. However, for the right candidate, our client will provide relocation assistance or a sign-on bonus. COMPENSATION $90K to $110K ...read more
Contact:
Phone:(734) 663-0877
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Compliance Specialist
Category: Information Technology
Compliance Specialist ResponsibilitiesWork closely with internal and external business partners to understand regulatory needs and impact to business processes to obtain compliance Define enforcement of and ensure compliance with policies and procedures affecting customer-facing production application environment Participate in the design and implementation of system and application monitoring, task automation, SOP development and execution Work with other internal and external compliance and regulatory ...read more
Contact:
Mitchell Turner
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Business Analyst
Category: Information Technology
Business Analyst Responsibilities Develop comprehensive requirement specifications as part of the SDLC to define functional and non-functional requirements that will be used to change new or currently deployed solutionsWork comfortably within both Agile and Waterfall development methodologiesSupport optimization of the SDLC process to ensure quality and timely delivery of software deliverablesCollaborate with QA team to ensure traceability between defined test cases and elicited testingCollaborate with ...read more
Contact:
Brendan Tobiczyk
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Account Manager
Category: Insurance
Account Manager Responsibilities Serve as the main contact for all commercial small business customersIssue ID cards and proof of insuranceResponsible for accounting, billing, invoicing, finance agreements, and policy cancellationsOversee and maintain client files  Account Manager Requirements 1-5 years of experience in the insurance industry (preferably experience with commercial lines or small business units)  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for ...read more
Contact:
Kara Millerschin
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Account Manager
Category: Insurance
Account Manager Responsibilities Serve as the main contact for all commercial small business customersIssue ID cards and proof of insuranceResponsible for accounting, billing, invoicing, finance agreements, and policy cancellationsOversee and maintain client files  Account Manager Requirements 1-5 years of experience in the insurance industry (preferably experience with commercial lines or small business units)  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for ...read more
Contact:
Kara Millerschin
Phone:(248) 922-4500
38700 Van Dyke Ave., Ste 150
Sterling Heights, MI 48312
Lathe Operator
Category: Machinist
The CNC Lathe Operator/Programmer programs, sets up, operates, and tends lathe and turning machines to turn, bore, thread, form, or face various kinds of steel. This job description indicates the general nature and level of the work that is expected. It is not designed to contain a comprehensive or all-inclusive listing of activities, duties or responsibilities. Other duties may be required. Primary ResponsibilitiesMust be able to set cutting speeds depths, and feed rates.Adjust tool positions and ...read more
Contact:
Phone:(586) 806-6614
38700 Van Dyke Ave., Ste 150
Sterling Heights, MI 48312
CNC Machinist
Category: Machinist
Summary of Responsibilities The CNC Mill Operator sets up, operates to mill, plane, shape, groove, or profile metal work pieces.  This job description indicates the general nature and level of the work that is expected.  It is not designed to contain a comprehensive or all-inclusive listing of activities, duties or responsibilities.  Other duties may be required Primary ResponsibilitiesSelects and installs cutting tools and other accessories according to specifications, using hand tools or power ...read more
Contact:
Phone:(586) 806-6614
38700 Van Dyke Ave., Ste 150
Sterling Heights, MI 48312
CNC Lead 2nd Shift Livonia, MI
Category: Machinist
Set up, program, and operate all necessary equipment to produce, inspect, assemble and package all types of bearings and similar products.  Equipment can include but may not be limited to CNC machines (with or without automated material handling), washers, assembly equipment of various types, or any other types of equipment that may be added, in order to have a complete manufacturing process.  Duties include: Reading and understanding manufacturing drawings and setup plansWriting and installing programs ...read more
Contact:
Phone:(586) 806-6614
215 Plexus Drive
Oxford, MI 48371
Metalworking/Finishing
Category: Manufacturing
Job Summary Under the supervision of the Plant Manager, operate metal finishing machinery including blasting, belting, deburring and straightening in compliance with ISO 14001 and AS9100 Quality systems and procedures.Primary ResponsibilitiesOperation of blasters, belt sanders, die grinders, carbide burrs and pressesTrack work in process using Plex ERP systemMaintain  and clean work area as per established  safety and quality standardsPerform inspection of partsUnderstand and implement ISO 14001 and AS9100 ...read more
Contact:
Lissa Barron
Phone:(248) 842-2192
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Warehouse Inventory Control Analyst
Category: Manufacturing
Warehouse Inventory Control Analyst Responsibilities Inventory Control Analyst, Material Return / Desktop Admin PositionMR Reports (Metric and P&R) COGNOS reportAudit MR Tags (Pink, Orange, Blue, Purple)-Review for MercuryRun AVLCR Report-Follow up on open one-liners            Answer Dealer Emails-Questions and Additional Credits-Missing Credits (throughout the day)       Assist on Terminations-inform customer of Approval and ensure proper disposition of Non-Sellable parts            Code 12-Process, scrap ...read more
Contact:
Steven Sharon
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Repair Technician – Electrical / Pneumatic
Category: Manufacturing
Repair Technician – Electrical / Pneumatic ResponsibilitiesMaintenance or Electrical Tool RepairEvaluating, dissembling, and repairing hand held pneumatic and electronic fastening tools Ideal candidate would be someone who recently graduated from trade school specializing in mechanical or electrical repairEvaluate, disassemble, and repair hand held pneumatic fastening toolsGenerate detailed repair description in tool tracking databasePerform tool validation per customer specifications  Repair Technician – ...read more
Contact:
Steve Ellsworth
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Janitor / General Labor
Category: Manufacturing
Janitor / General Labor Responsibilities Cleaning around and behind machinesRequired to wear a back vacuumAbility to stay busy  Janitor / General Labor Requirements High degree of attention to detailHigh School DiplomaValid Driver’s LicenseExposure to shop machinery soundsNon-Slip Shoes  Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national ...read more
Contact:
Katie Linton
Phone:(248) 922-4500
38700 Van Dyke Ave., Ste 150
Sterling Heights, MI 48312
Quality Manager: Forging
Category: Manufacturing
Position Title:  Quality Manager Essential Duties: ·       Manage the operating system to maintain compliance to latest revision of the ISO Standard as the Management Representative. ·       Establish and maintain compliance to internal auditing, process controls, quality system reviews and documentation. ·       Manage the equipment, gages, and tools to support the timely manufacturing of quality products and services delivered to customers. ·       Establish department objectives that support the ...read more
Contact:
Phone:(586) 806-6614
PO Box 2934
Ann Arbor, MI 48106
Application Engineer (C++) (2687-AA)
Category: Programmers
Application Engineer (C++) (2687-AA) We are searching for an Application Engineer with solid C++ programming skill. If you enjoy helping customers solve problems, this may be the ideal opportunity for you. LOCATION Ann Arbor, MI area COMPENSATION Commensurate with experience Please note: In some cases, our client elects to engage candidates in a contract-to-hire model. If this applies to you, you would be an employee of Stout Systems for approximately 6 months and then convert to employment with ...read more
Contact:
Phone:(734) 663-0877
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Purchasing Director - 00043
Category: Purchasing
Purchasing DirectorBasic Functions:— Develop and direct objectives, policies, and processes regarding all purchasing functions.— Review vendor quality and maintain price controls and inventory flows to identify and implement efficient purchasing programs— Create functional strategies and specific objectives for buyers and develop budgets/policies/procedures to support the functional infrastructure— Solid knowledge of overall purchasing function— Successful candidate will exhibit a willingness to personally ...read more
Contact:
Phone:(248) 290-0500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Inside Sales Representative
Category: Sales
Inside Sales Representative ResponsibilitiesPrimarily involved in the access and persuasion steps of the sales process; including qualifying, relationship building, needs evaluation, solution development / presentation and closingManage relationships with customersFocus on straightforward quotation inquiries for standard products & servicesProcess sales invoices, quoting and provide status report to clientsAchieve sales goals by converting and penetrating accountsEnsure adherence to all applicable laws ...read more
Contact:
Troy Renkiewicz
Phone:(248) 922-4500
1700 Harmon Rd, Ste. 1
Auburn Hills, MI 48326
Technical Recruiter
Category: Sales
Technical Recruiter ResponsibilitiesLooking to bring in goal driven, positive, and open-minded team members Day to day we are very team-oriented and have a very high-energy cultureWe focus on impacting each other whenever we canWe do not hire our Account Managers externally; instead we promote entirely within the companyWe have recently changed our promotion structure and have a new opportunity for Senior Recruitment as wellThis will include a rise in your salary as well as the percentage that you earn in ...read more
Contact:
Erica Hall
Phone:(248) 922-4500
675 E. Big Beaver Road, Ste. 105
Troy, MI 48083
Warehouse Clerk - Laborer 00113
Category: Transportation and Warehousing
— General laborer duties include: unpacking/packing, scanning, sorting and stacking automotive parts.  — (Must be able to lift up to 50 lbs, be able to sit, stand bend for long periods of time) — Reliable transportation required — Benefits available — High school diploma or valid GED is mandatory  — Drug and Background Check Required.  To apply, visit our website at www.pgkservices.net:— Select "Career Opportunities" — Select “Job - Click Here"— Refer to Job Code 16-00113  PGK is an equal opportunity ...read more
Contact:
Phone:(248) 290-0500